Our Blog
How do I eliminate strong chlorine odors in my McKinney pool?
Strong chlorine odors in a McKinney pool usually mean chloramines (combined chlorine), not too much free chlorine. Fix the smell by testing combined chlorine, performing breakpoint chlorination or non-chlorine shock, improving circulation, and keeping pH at 7.2–7.6....
What maintenance tasks do McKinney pools need most?
With McKinney’s heat and occasional freezes, you should focus on consistent chemical balancing, frequent skimmer and filter cleaning, and routine pump and equipment inspections to prevent damage. You need to test pH, alkalinity, and sanitizer levels weekly, shock...
How do I know if my McKinney pool filter needs replacement?
filter performance tells you when replacement is necessary: if your pressure gauge remains high after backwashing, flow and return pressure drop, or the water stays cloudy despite proper chemistry, you should consider a new filter. Visible cracks, media breakdown or...
How can I prevent cloudy water in my Plano pool?
With consistent testing and maintenance, you protect your pool from cloudiness by keeping chemistry balanced (pH 7.2-7.6, alkalinity 80-120 ppm, free chlorine 1-3 ppm), running the filter daily 8-12 hours, cleaning skimmers and backwashing routinely, brushing walls...
Why is my Plano pool heater running inefficiently?
Most Plano pool heater inefficiency stems from poor maintenance and installation issues you can correct: dirty filters and coils, low water flow from clogged skimmers or pump problems, calcium buildup and scale reducing heat transfer, incorrect thermostat settings or...
How do I remove algae stains from my Plano pool?
pool algae stains in your Plano pool are removable when you follow a stepwise approach: test and balance your water, brush stained areas, shock with chlorine, apply a polymeric algaecide for persistent stains, run the filter continuously while vacuuming, and clean or...
What is the best type of filter for Plano pools?
Overall, you should choose a cartridge filter for most Plano residential pools because it gives the best balance of fine filtration, lower energy use, and minimal upkeep; cartridges trap smaller particles than sand, avoid frequent backwashing, and fit your equipment...
How do I stop my pool pump from leaking in Plano?
pool pump leaks in Plano are common but manageable; you can stop them by systematically diagnosing the source-lid O-ring, shaft seal, unions, or housing cracks-performing targeted repairs or part replacements, clearing debris, and scheduling regular inspections to...
Why is my pool water pH unstable in Plano?
Just because you balance chemicals doesn’t mean pH will stay steady; local factors like hard water, high alkalinity, heavy bather load, strong sunlight, and frequent splash-out drive rapid swings in Plano’s pools. You should test pH and total alkalinity daily, adjust...
Swimming Pool Filter Cleaning Service in Allen TX
Swimming pools require regular maintenance to ensure their efficiency and longevity. You may overlook the importance of filter cleaning, which directly impacts your pool’s water quality and overall performance. By utilizing a professional swimming pool filter cleaning...
How do I choose the best pool cleaning service in Anna?
Choosing The Best Pool Cleaner In is essential for North Texas pool owners. RMD Pool Service in Allen, TX explains choosing the best pool cleaner in and what you should know. Just because you have a pool doesn’t mean you have to struggle with its maintenance. Choosing...
What is the cost of weekly pool maintenance in Anna?
With the increasing popularity of swimming pools in Anna, understanding the cost of weekly pool maintenance is crucial for you as a pool owner. Regular maintenance ensures not only the cleanliness and safety of your pool but also its longevity. In this post, you’ll...