Our Blog
How can I prevent leaves from clogging my pool in Anna?
Many pools in Anna get swamped with leaves from oaks and hackberries during fall and windy days, but you can minimize clogs by using a tight-fitting leaf net, running your pump and skimmer longer during shedding seasons, installing gutter guards and pool screens,...
What is the best way to maintain a saltwater pool in Anna?
Pool maintenance in Anna demands regular testing and proactive care: you should test salt, free chlorine, pH and alkalinity twice weekly, clean the salt cell monthly, backwash or clean filters as needed, run circulation 8-12 hours daily, shock after heavy use or rain,...
Why is my pool heater not staying on in Anna?
Many times your pool heater in Anna won’t stay on because of thermostat miscalibration, faulty ignition or pilot, interrupted gas or electrical supply, low water flow from clogged filters or pump issues, pressure/flow switches tripping, or safety sensors reacting to...
How do I remove metal stains from my pool in Anna?
Just because metal stains mar your pool in Anna doesn’t mean they can’t be fixed; you should test water for metals and pH, lower free chlorine, treat with a sequestering agent or stain remover designed for pools, brush and vacuum stained areas, run an oxidation...
How often should my pool be vacuumed in Anna?
You should vacuum your pool in Anna about once a week as a baseline, increasing to twice weekly during heavy use, pollen season, leaf fall, or after storms; vacuum immediately if you see algae or debris. Your pool size, surrounding foliage, swimmer traffic, and local...
What is causing foam on my pool surface in Anna?
Over time you may notice a persistent foam on your pool surface in Anna, caused by organic contaminants (sunscreen, body oils, leaves), imbalanced water chemistry, high calcium or total dissolved solids, or agitation from wind and filtration. Identifying the...
How can I keep my pool safe during storms in Anna?
Safety starts when you secure equipment and reduce hazards before storms hit Anna: lower your pool water level slightly, remove or secure covers, store loose furniture and toys, and unplug and elevate electrical devices. Install and maintain reliable drain covers,...
Why does my pool lose chlorine quickly in Anna?
If your Anna pool is losing chlorine quickly, common causes are high cyanuric acid overload, heavy bather load, algae or biofilm, insufficient pump run time, or stale test results. Anna's open sun and warm summers burn through unstabilized chlorine fast — verify CYA...
How do I prevent scale buildup in my Frisco pool?
You can prevent scale buildup in your Frisco pool by keeping water balanced, testing pH and alkalinity weekly, maintaining calcium hardness within recommended ranges, using a sequestering agent when hardness runs high, brushing and vacuuming surfaces, backwashing and...
Why is my Frisco pool always cloudy after rain?
Just after a storm, your Frisco pool often turns cloudy because rain dilutes sanitizers, introduces debris and organic contaminants, and alters pH and alkalinity, which together reduce sanitizer effectiveness and promote suspended particles; you should test and adjust...
How often should I backwash my filter in Frisco?
How Often To Backwash Filter In is essential for North Texas pool owners. RMD Pool Service in Allen, TX explains how often to backwash filter in and what you should know. Frisco conditions affect how often you should backwash your filter; in high-use or after heavy...
What is the best pool care routine for Frisco homeowners?
With a consistent weekly schedule and adjustments for Frisco’s heat and water hardness, you can keep your pool clean, safe, and inviting year-round. You should test and balance chemicals, clean filters and skimmers, brush walls, vacuum debris, and inspect equipment;...